:D
(https://photos.smugmug.com/Motorcycles/KTM/i-2KQMKxx/0/5014de14/X2/klx%20jet-X2.jpg)
Someone's been riding their KTM too much lately.
I guess could bump it up to a 351 and put that mikuni pumper carb on it and I wouldn't have to clean those jets.
Wow!!
Quote from: Gam on April 10, 2020, 04:18:22 PM
I guess could bump it up to a 351 and put that mikuni pumper carb on it and I wouldn't have to clean those jets.
Kinda the more expensive solution, but worth it IMHO
KLX is running like a top now. i did have to take it back off after rebuild, cranked and idled fine, it just diee when you gave the gas, so I took it off again, jets clean as a whistle, you can blow into a port on the air side and the slide should rise on these CV carb, wasn;t doing that, all that crap was cockeyed in the slide, fixed that and good to go.